Model: SNC300 Discharge Height: 6500m
Diameter: 5300mm Volume: 219 m³
Capacity: 300 Ton Container: One set (2*40HC)
What's the cement silo? why we use this sort of device to storage the cement and a few power substances?
Cement silo is one kind of tank which use to storage the powder substances. this type of material need to keep away from the liquid substances, so we need the tank sealed closely. what’s greater some big concrete blending plant cannot be paused due to the concrete have to continuously deliver. some small tank can't guide so we use the cement silos.
Cement silo collectively with screw conveyors can supply the cement without worry approximately the supplement. additionally every now and then while the fee of cement boom we are able to use the silo to garage that could store the price of clients.
Fly Ash Cement Silo SNC300 Ton Bolted Cement Silo
NO. | Model | Discharge height | Diameter of body | Parts of body | Material size | m3 | (t) |
1 | SNC50 | 4200 mm | 3100mm |
4*3 | upper coneδ3,body partδ3,lower coneδ4 ,legs φ219*4 | 38 | 3.4 |
2 | SNC100 | 4200 mm | 3100mm |
4*6 | upper coneδ4,upper and lower partδ4,body partsδ3,lower coneδ5+δ4,legs φ219*5 | 70 | 5 |
3 | SNC150 | 4200 mm | 3100mm |
4*9 | upper coneδ3,upper of bodyδ4,body parts δ3,lower coneδ5,lower coneδ6+δ4, legs φ219*6 | 102 | 6.5 |
4 | SNC200 | 6500 mm | 4400mm | 6*6 | upper coneδ4,the top and bottom piece of bodyδ4.5,other body part δ4,lower coneδ6 +δ6+δ4,legsφ273*7 | 147 | 10.7 |
5 | SNC300 | 650 0mm | 5300mm | 8*6 | upper coneδ6,bodyδ6,lower coneδ8 +δ6+δ5,legs φ325*8
| 219 | 17 |
The Body Part of Silos
The Upper and Lower Cone of Silos
The Support Legs
FAQ:
1. What’s the difference of the whole type and the bolted type cement silo?
The whole type silo is usually welded in the customer's site which can save the delivery charges and the limit of some road. The bolted type is for the foreign and some site not allow weld outside.
2. What’s the advantages of the bolted cement silo?
Bolted cement silo is not only designed for foreign customer but also for our domestic market.
For foreign customer it can save delivery space which will reduce the freight charges and for domestic market it can protect the environment because it avoid the outdoor welding.
3. What customer should provide before we design?
Commonly, we need the know the discharge height,the diameter, the total height and your country's voltage and frequency.
4. The installation
About the installation we will send you the installation videos, it is very easy and convenient for you to assemble.
5. Payment terms and production cycle
30% prepayment when place the order, the balance should pay before delivery. Usually the delivery time is 20 days after the prepayment.
Submitted successfully
We will contact you as soon as possible